search

Winland-electronics EA800-ip Manual de usuario Pagina 27

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 60
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
    •
  • MARCADORES
    • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 26
Installation
D-011-0152 27
.
Figure 12 EA800 Console Wired 4-20mA Sensor Connections
Programming
When powered-up, the EA800 is ready for programming. The following is an overview of the general process for
programming the EA800:
■ View the MAIN MENU and unlock the EA800 as described in “Accessing the MAIN MENU for Programming” on
page 28.
■ Set the system configuration as described in “Configuring System Parameter Settings” on page 28.
■ Add the wireless sensors. See the appropriate subsection under “Adding Wireless Sensors” on page 29.
■ Add the wired sensors. See the appropriate subsection under “Adding Wired Sensors” on page 32.
■ Verify performance of the wireless sensors. See “Verify Wireless Signal Strength” on page 31.
■ Configure the relays. See “Configuring the Relays” on page 34.
Note: When no sensors are programmed in the EA800 system, the EA800 console boots up with a 30-minute
delay before the alarm buzzer sounds. At this time the Alarm screen is displayed with a System Alarm
caused by the fact that no sensors have been programmed yet. To prevent the System Alarm from acti-
vating, you must program at least one connected sensor into the EA800 console prior to the end of the
30-minute alarm time-out. If the alarm buzzer sounds press the Alarm Silence key to temporarily silence
the alarm buzzer.
4-20mA Sensors
(3-wire)
EA800
Console
Powered
External
Adapter
Powered
J6
Input N
User
supplied
cable
4-20mA
Transmitter
Connector
NC
J5
Aux Power Out
J6
Input N
User
supplied
cable
NC
J5
Aux Power Out
External
Power
Adapter
4-20mA
Transmitter
Connector
4-20mA
Output
4-20mA
Output
4-20mA Sensors
(2-wire)
J6
Input N
User
supplied
cable
4-20mA
Transmitter
Connector
NC
J5
Aux Power Out
EA800 Console
J6
Input N
User
supplied
cable
NC
J5
Aux Power Out
External
Power
Adapter
4-20mA
Transmitter
Connector
4-20mA
Output
4-20mA
Output
4-20mA Sensors
(4-wire)
J6
Input N
User
supplied
cable
4-20mA
Transmitter
Connector
NC
J5
Aux Power Out
J6
Input N
User
supplied
cable
NC
J5
Aux Power Out
External
Power
Adapter
4-20mA
Transmitter
Connector
EA800 Console EA800 Console
EA800 ConsoleEA800 ConsoleEA800 Console
Vista de pagina 26
1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 59 60

Comentarios a estos manuales

Sin comentarios
Relacionado con productos y manuales para Instrumentos de medición Winland-electronics EA800-ip
Instrumentos de medición Winland-electronics TA-2HL Manual de usuario   (4 paginas)
Instrumentos de medición Winland-electronics MTA-1 Manual de usuario   (2 paginas)
Instrumentos de medición Winland-electronics HA-1 Manual de usuario   (4 paginas)
Instrumentos de medición Winland-electronics TA-40 Manual de usuario   (4 paginas)
Instrumentos de medición Winland-electronics PS-110 Manual de usuario   (4 paginas)
Instrumentos de medición Winland-electronics VAL-1 Manual de usuario   (11 paginas)
  • Sumix Interphase Tech Mingda Gunnar Optiks WebMux
  • Binatone Contestadores automáticos KTM Accesorios De Panel Plano Canon Proyectores de datos ACDelco Generadores De Poder Sennheiser Kits de montaje
  • Samsung GT-I9300T Toyota 2009 Sequoia Samsung PS-50P96FDR Electrolux EMS3067X LG M4715CCBA
  • Acer VG270 Manual de usuario Philips SA1100/02 Manual de usuario Cables to Go 35566 Manual del operador Electrolux ESF2440 Manual de usuario Amana ABB1922FEW Manual de usuario